HOME>PRODUCTS>BENDING ROLL>BS-S Initial pinching type 3 rolls

BENDING ROLL

Standard machine serie

Customized machine series

BS-S Initial pinching type 3 rolls

From edge bending to roll forming is possible. (Center adjustment is equipped)

From edge bending to roll forming is possible. (Center adjustment is equipped)

BS-S Initial pinching type 3 rolls

Processible Dimensions at Machine

Processible Dimensions at Machine


1.遶ｯ譖ｲ縺偵ｒ蜿ｯ閭ｽ

3.繧ｿ繧､繧ｳ迥ｶ繧帝亟豁｢

4.繝・ず繧ｿ繝ｫ陦ｨ遉ｺ

  1. Edge bending process is possible
    Edge bending is possible with three rolls bending machine by moving lower rolls up and down separately.
  2. Processing accuracy is excellent
    Rolls are quenched and grinded for wearing resistance. Lower rolls are locked after upper positioning to maintain high roundness accuracy.
  3. Prevents center wide cylindrical shape
    Roll balance is simultaneously controlled and prevent unevenness of products.
  4. Digital display Upper roll is perfectly fixed.
    The position of lower roll displays on the digital counter. The processing condition is selected so no need to guess.
  5. Strong structure
    The flame is strong structure with joist, therefore it only requires simple basic construction. Also this is designed for small space.

Production procedure

Feed the work / Rough forming 1 / Rough forming 2 / Edge bending1 / Edge bending 2 / R forming

Production procedure


Standard specifications

Standard specifications

  • The data shown above is tested with SS400 (steel), therefore it can be changed depends on different materials. Please contact us for more information. Specifications may be subject to change without prior notice.
  • Please prepare the following information for inquiry.
    Material, production size(minimum maximum), production amount(per day), work sheet size (thickness, width, length,), previous process, accuracy of roundness.