BENDING ROLL
Standard machine serie
Customized machine series
BU-S Quick bender
3 rolls bending machine process in second by easy operation. (Center adjustment is equipped)
Front stopper Processing view
Processible Dimensions at Machine
Work examples
Conical shape forming is possible with attachment.
- The machine employs a backup roller for compensating the bottom rolls of small diameter and fitting the top roll deflection. (Adjustment Mechanism)
- The machine makes the straight portion of the plate ends extremely smaller than the conventional 3-roll machine does, owing to the smaller diameter bottom rolls and also the closer axes between rolls.
- For high accuracy edge bending
- High production model that thin and long work can be processed at once.
- 3 rolls driving by hydraulic motor
- Rolls are quenched and grinded, so stainless steel or aluminum plates can be processed without any damages on surface.
- High tensional plate or 6mm thickness steel plate can be processed in small diameter which urethane roll is impossible.
Edge bending accuracy can be also increased by forming ring with suitable with work bending diameter.
Mail applications
- Motor casing
- Tanklorry
- Drum
- Damper
- Electric wire dram
- Air conditioning duct
- Muffler
- Coil core
- Brake band
- Water heater tank
- Boiler
- Automotive parts
- Case converter
- Main shell for compressor of air conditioner
- Compressor tank
- Compressor of Eco quite
Production procedure
1.Feeding a work - supporter closed / 2.Edge bending / 3.Roll rotates / 4.Complete and reset
Full automatic type
Start from feeding one sheet from stoker, automatically bending process and taking out.
Feeding one sheet automatically / Roll forming / Finish forming / Automatic discharge Work piece Load Position
Standard specifications
- The data shown above is tested with SS400 (steel), therefore it can be changed depends on different materials. Please contact us for more information. Specifications may be subject to change without prior notice.
- Please prepare the following information for inquiry.
Material, production size(minimum maximum), production amount(per day), work sheet size (thickness, width, length,), previous process, accuracy of roundness.
Bending roll and shrinking processing machine (PAT.)
Feeding single sheet automatically by vacuum pad / Roll forming / Automatic discharge / Shrinking press
After bending roll processing, adding the shrinking press to increase the roundness accuracy. Also accuracy of jointing point is improved.
Quick bender series
Vertical rolls machine BU-SH200
Simple operation with high accuracy.
Suitable for narrow width work.
<Specification >
Efficient processing width of roll : 200m/m
Roll diameter : 100-200m/m
Roll speed : 0-7m/min
Motor : 1.5-3.7kW
Vertical rolls machine BU-ST1200
Upper tapered roll can be changed for variety of conical forming. Also angle of top roll can be adjustable.
<Specification>
Efficient processing width of roll : 1200m/m
Thick plate 3 rolls bending machine BU-SJ3000
3 rolls bending machine especially suitable for processing long and thick plate.
The upper roll adjusts up and down by hydraulic cylinder.
Go to top