HOME>PRODUCTS>BENDING ROLL>Safety device / Option

Safety device / Option

ISEL's bending roll machines are concerned the safety to preventing the accident or second hazard.

Operation buttons are push button electric sauce is key switch type.

Mono-lever switch has a possibility of catching clothes sleeve during operation. Therefore, it has been abolished and changing to operate with pushed buttons.
Key switch has been used for turning on and off. Hence, it prevents from mistakenly touched the machine by other person.
Operation buttons are push button electric sauce is key switch type.

At least 2 emergency stop buttons are installed.

Operator may not be only one. By installing an emergency stop buttons on the main body, the disaster could be avoided immediately.
At least 2 emergency stop buttons are installed.


Wire switch is installed over 1000mm length machine.

There might be the case with over 1000mm length body, which an operator cannot be reached to the emergency stop button. Therefore emergency wire stop switch is installed over 1000mm length machine. Emergency stop works when an operator steps on it.
Wire switch is installed over 1000mm length machine.

Safety guard for the supporter.
 

Safety guard is installed for preventing an operator from hitting by supporter.
Safety guard for the supporter.


  • The additional safety device is optional. The safety device principally cannot be removed.
  • The serious accident might be happened by mis-operation, so please read an instruction carefully before operating.
  • The safety device may not fully avoid the accident. Please pay attention to the operation.

Option(Special specification)

Option(Special specification)

specifications are possible depending on customer's production system.
Full automatic operation, touch panel controller (picture), feeding device, discharging device, etc Please contact us.

Note for operation

CAUITON Sufficient cautions are required for the operation.
Please read the instruction before operation.


Plasticity processing technology for environment company

Plasticity forming technology is less CO2 processing also reducing the processing time and cost. We suggest to use the plasticity processing.

Plasticity processing technology for environment company


Applications

Automotive parts: Caster case, muffler, engine mount
Home electrics: Mail shell for compressor of air conditioner, inner dram of washing machine, tank of eco quite, motor case
Construction machine parts: Bucket for construction machine, muffler parts etc.
Air craft parts.